|
|
|
The Model 5 CO2 Fogger is used to visualize airflow patterns in cleanrooms. The fog is produced when a 1 lb. block of dry ice is placed in the heated DI water reservoir. This is NOT an on demand fogger. It will continue to produce the fog until the dry ice has been consumed. During operation it can be unplugged and carried to the area to be tested. |
|
|
The CO2 Fogger wand is designed to allow the user to select the type of fog dispersed from the wand, e.g., jet fog (top photo) or curtain fog (this photo). Simply sliding the end of the wand will select the desired fog pattern. |
SPECIFICATIONS |
|
DIMENSIONS: 12 ¼” W x 11 ¾” H x 11 ½” D (311 x 298 x 292) |
WEIGHT: 24 lbs. dry (10,9 Kg) |
|
DI WATER CAPACITY: < l liter |
TIME TO HEAT: < 5 minutes |
|
FOG TIME: 6-10 minutes per charge |
FOG DISTANCE: 3 feet (0.9m) |
|
ELECTRICAL: 120VAC @ 12.8A or optional 240VAC @ 10A |
OVERTEMP PROTECTION: High level thermostats |
CO2 FOGGER OPTIONS |
|
|
Storage and Transport Case
This hard shell, foam lined case has wheels and a pull-handle to protect the Fogger when not in use and to prevent loss of the individual parts, e.g., Fogger, hose, wand, cooler and DI water container. |
|
|
Model 460 Insta-Ice™ Dry Ice Block Maker
Attach the hose to a cylinder of liquid CO2 and the other end to the block maker, open cylinder valve and a 1 lb. block of dry ice will be made in approximately 2 minutes. |
Answers to frequently asked questions about CO2 Foggers |
|